This convenient kit allows VBC owners to eliminate the need to tape batteries to their chassis without sacrificing chassis flex. Includes all necessary parts, hardware, and instructions.


TUH1006
Tape Eliminator Kit- VBC Wildfire
Unlock the full potential of the VBC Flash-04 by equipping it with the Tuning Haus 2.5mm carbon chassis, pod, & spacer set. In addition to shaving more than 30 grams of weight from the car, the design has been extensively developed under competition conditions and proven to work equally well on tarmac or carpet. The significantly narrower chassis profile eliminates handling problems caused by chassis rub. Also included are two 0.5mm carbon shims for quick and convenient front ride height adjustments. Manufactured in USA from premium carbon fiber laminate.


TUH1007
VBC Flash-04 2.5mm chassis/pod/spacer set
Utilizing extra spacers can be a quick and convenient way to accurately adjust front ride height without disassembling the front suspension.


TUH1008
.5mm front chassis spacer for TUH1007 (2)


These CNC-routed fiberglass shims provide an additional way to reduce right height when needed for track conditions or tire requirements. Includes one pair each of three sizes.


TUH1013
Rear pod shim set (.5/.75/1mm) VBC Flash-04 (2)


These machined and anodized aluminum rear axle bearing carriers replace the standard plastic VBC units. Providing the precision fit that today’s racers demand, these parts increase durability and precision with only a slight (6g) weight penalty.


TUH1028
Aluminum Rear Bearing Sliders for VBC Flash 04 (pr.)
Carbon braces from Tuning Haus replace the stock VBC part and replace it with a custom-looking, lighter part made from 2.0mm carbon. Available in standard (kit) and countersunk to accept Tuning Haus thumbscrews.


TUH1052
Std. Carbon Battery Brace-VBC Flash 04
Carbon braces from Tuning Haus replace the stock VBC part and replace it with a custom-looking, lighter part made from 2.0mm carbon. Available in standard (kit) and countersunk to accept Tuning Haus thumbscrews.


TUH1053
Countersunk Carbon Battery Brace-VBC Flash 04
Common F1 differential designs use multiple thin washers in various alignments to control the force placed on the outside ball or thrust bearing, which ultimately controls the slip and smoothness of the assembly. Often times the material fatigue and the washers flatten out from use, making it difficult to adjust the diff. These heavy duty washers from Tuning Haus that can be used individually or in pairs for extremely demanding conditions. The O.D. of 9mm, I.D. of 4.3mm and overall height of 1.3mm make them usable on most manufacturers F1 differentials.


TUH1105
Heavy Duty Cone Washers –F1 Differentials (pair)
Tuning Haus delivers a revised and improved alternative to the stock Lightning F kingpin with a precisely ground, polished and TiCN coated front kingpin that eliminates the e-clip groove above the steering arm for improved durability. Includes Tuning Haus 2mm circlips for the best possible spring alignment and security.


TUH1110
Precision TiCN Kingpins (pr.) VBC Lightning F
Controlling chassis roll is critical for a well-handling F1 chassis. This new damper assembly from Tuning Haus delivers the precision of a machined aluminum plunger and damper tube, while also improving reliability with integrated ball cup studs on both components. The robust 6.4mm diameter plunger provides more surface area for various damping fluids or greases while retaining an overall size that allows it to be used on a wide range of F1 chassis.


TUH1111
Machined XL Roll Damper- Fits Tamiya, VBC, and others
New generations of F1 bodies benefit from a lower wing mounting location, and this rear brace allows for a variety of lower options compared to the original part. Made in USA from premium 3mm carbon fiber and accepts stock or Tuning Haus wing standoffs.


TUH1117
Rear Brace-Lowers Wing for VBC Lightning F