Tuning Haus delivers the ultimate in precision, durable, friction-free kingpins through the use of a titanium-carbon coating process. Install a pair along with fluorine-coated suspension balls for a silky-smooth front suspension.


TUH1001
TiCN kingpins (pr.) Fits F104 and others
These carbon fiber spacers easily allow F104-style front ends to be shimmed for fast and convenient ride height adjustments without the hassle of disassembling the king pin/steering block/spring assembly.
Package includes two 0.5mm spacers.


TUH1009
.5mm front chassis spacer- F104 and others (2)
These carbon fiber spacers easily allow F104-style front ends to be shimmed for fast and convenient ride height adjustments without the hassle of disassembling the king pin/steering block/spring assembly.
Package includes two 0.75mm spacers.


TUH1010
.75mm front chassis spacer- F104 and others (2)
These carbon fiber spacers easily allow F104-style front ends to be shimmed for fast and convenient ride height adjustments without the hassle of disassembling the king pin/steering block/spring assembly.
Package includes two 1.0mm spacers.


TUH1011
1mm front chassis spacer- F104 and others (2)
This graphite rear bulkhead plate offers three wing height options and is a direct fit on F104v2 and RM-01 models.


TUH1014
Carbon Rear Plate w/adj. wing mounting locations-F104
Specifically made for the TRF101, this graphite rear bulkhead plate offers three wing height options.


TUH1015
Carbon Rear Plate w/adj. wing mounting locations-TRF101
Reduce rear wing failures when using the new Tuning Haus carbon brace. Easy to install, it offers additional impact protection while delivering a custom look. Best when used with countersunk washers or flanged for wing mounting.


TUH1016
Carbon Rear Wing Mount Brace-F104/TRF101
Add the finishing touch to any Ferrari scheme with this red carbon rear wing brace. Easy to install, it offers additional impact protection while delivering a custom look. Best when used with countersunk washers or flanged for wing mounting.


TUH1017
Red Carbon Rear Wing Mount Brace-F104/TRF101
Add the finishing touch to any McLaren or Mercedes scheme with this silver carbon rear wing brace. Easy to install, it offers additional impact protection while delivering a custom look. Best when used with countersunk washers or flanged for wing mounting.


TUH1018
Silver Carbon Rear Wing Mount Brace-F104/TRF101
Gain added strength and the side benefit of a touch more front end weight with these 4 x 30mm steel screws for Tamiya front ends.


TUH1019
4mm x 30mm Steel Screws (2)-F104 front end
Extensive testing on both asphalt and carpet has yielded a chassis design that significantly improves the performance of the TRF101. Manufactured in the USA from premium carbon laminate, the enhanced flex from the 2.5mm design improves lap times through faster mid-corner speed and increased acceleration through a 12g component weight reduction. Includes two 0.5mm front spacers for quick and easy front ride height adjustments.
TUH1029
TRF101 2.5mm chassis/pod/spacer set
Tuning Haus battery braces deliver a custom look and additional shock clearance for Tamiya F1 chassis while maintaining critical kit alignment and geometry dimensions. Fastener slots used in the kit parts are replaced with through-holes for a more precise and secure alignment. Made from 2.0mm premium carbon fiber laminate.

TUH1036
Std. Carbon Battery Brace-F104v2
Packed with the features identical to TUH1036 and TUH1038, these braces are further enhanced with an 82-degree countersink on the upper surface to accept the new range of Tuning Haus thumbscrews; allowing for perfect alignment between the battery brace/shock mount and chassis bulkheads.


TUH1037
Countersunk Carbon Battery Brace-F104v2
Tuning Haus battery braces deliver a custom look and additional shock clearance for Tamiya F1 chassis while maintaining critical kit alignment and geometry dimensions. Fastener slots used in the kit parts are replaced with through-holes for a more precise and secure alignment. Made from 2.0mm premium carbon fiber laminate.


TUH1038
Std. Carbon Battery Brace-TRF101
Packed with the features identical to TUH1036 and TUH1038, these braces are further enhanced with an 82-degree countersink on the upper surface to accept the new range of Tuning Haus thumbscrews; allowing for perfect alignment between the battery brace/shock mount and chassis bulkheads.


TUH1039
Countersunk Carbon Battery Brace-TRF101

Tuning Haus machined inserts deliver a greater degree of precision than plastic parts. Manufactured from aircraft aluminum and anodized black, they feature the same exterior dimensions as kit parts and afford a greater range of ride height options. Etched sizes are easy to read in crowded parts boxes.


TUH1054
Aluminum Bearing Inserts 0 offset, Tamiya (pr.)
TUH1055
Aluminum Bearing Inserts 0.5mm offset, Tamiya (pr.)
TUH1056
Aluminum Bearing Inserts 1.0mm offset, Tamiya (pr.)
TUH1057
Aluminum Bearing Inserts 1.5mm offset, Tamiya (pr.)
TUH1058
Aluminum Bearing Inserts 2.0mm offset, Tamiya (pr.)
TUH1059
Aluminum Bearing Inserts 2.5mm offset, Tamiya (pr.)

Tuning Haus machined inserts deliver a greater degree of precision than plastic parts. Manufactured from aircraft aluminum and anodized black, they feature the same exterior dimensions as kit parts and afford a greater range of ride height options. Etched sizes are easy to read in crowded parts boxes.


TUH1059B
Aluminum Bearing Inserts 3.0mm offset, Tamiya (pr.)
TUH1059BLW
Lightweight Bearing Inserts 3.0mm offset, Tamiya (pr.)
TUH1059C
Aluminum Bearing Inserts 3.5mm offset, Tamiya (pr.)
TUH1059CLW
Lightweight Bearing Inserts 3.5mm offset, Tamiya (pr.)
Common F1 differential designs use multiple thin washers in various alignments to control the force placed on the outside ball or thrust bearing, which ultimately controls the slip and smoothness of the assembly. Often times the material fatigue and the washers flatten out from use, making it difficult to adjust the diff. These heavy duty washers from Tuning Haus that can be used individually or in pairs for extremely demanding conditions. The O.D. of 9mm, I.D. of 4.3mm and overall height of 1.3mm make them usable on most manufacturers F1 differentials.
TUH1105
Heavy Duty Cone Washers –F1 Differentials (pair)
Controlling chassis roll is critical for a well-handling F1 chassis. This new damper assembly from Tuning Haus delivers the precision of a machined aluminum plunger and damper tube, while also improving reliability with integrated ball cup studs on both components. The robust 6.4mm diameter plunger provides more surface area for various damping fluids or greases while retaining an overall size that allows it to be used on a wide range of F1 chassis.


TUH1111
Machined XL Roll Damper- Fits Tamiya, VBC, and others
Tuning Haus delivers a durable and precision machined aluminum version of the venerable Tamiya plastic pivot, used on various F104v2 variants as well as the TRF101. Designed for use with Tamiya plastic upper pivot, cap screws, and pivot ball. A light coating of silicone fluid on the pivot recess during final assembly will result in a silky smooth rear suspension movement. No more worries about durability after hard impacts.


TUH1124
Machined Aluminum Lower Rear Pivot
(Tamiya F104v2, TRF101)
Replace heavy and rigid stock wing endplates with these lightweight polycarbonate offerings from Tuning Haus. Specifically made for the F60 and MP24 rear wings, they provide flexibility to eliminate crash damage, in addition to being simple to paint and decorate. Sold in pairs and includes mounting screws.


TUH1125
Polycarbonate Rear Wing Side Plates-F60
Replace heavy and rigid stock wing endplates with these lightweight polycarbonate offerings from Tuning Haus. Specifically made for the F60 and MP24 rear wings, they provide flexibility to eliminate crash damage, in addition to being simple to paint and decorate. Sold in pairs and includes mounting screws.


TUH1126
Polycarbonate Rear Wing Side Plates-MP24
These 0.75mm carbon fiber side plates are the perfect addition to any static project incorporating the Tamiya F60 rear wing. Includes instructions and mounting hardware. Not recommended for racing use.


TUH1127
Carbon Rear Wing Side Plates-F60
These 0.75mm carbon fiber side plates are the perfect addition to any static project incorporating the Tamiya MP24 rear wing. Includes instructions and mounting hardware. Not recommended for racing use.


TUH1128
Carbon Rear Wing Side Plates-MP24
These 0.75mm red carbon wing endplates are the perfect complement to any Ferrari red trim scheme. Includes instructions and mounting hardware. Not recommended for racing use.


TUH1129
Red Carbon Rear Wing Side Plates-F60
Put the finishing touches to any silver or chrome trim package by using these 0.75mm silver carbon wing endplates. Includes instructions and mounting hardware. Not recommended for racing use.


TUH1130
Silver Carbon Rear Wing Side Plates-MP24
Tuning Haus delivers a fast and convenient way to achieve a plush front suspension with these specially machined lower suspension balls. Designed as a direct replacement for the Tamiya lower ball, extensive on-track testing has proven them reliable in other chassis brands that use a part of similar design. The lightweight, aerospace polymer material reduces friction throughout the kingpin movement for more precise handling. Sold in pairs.


TUH1158
Machined Delrin® Lower Suspension Balls (pr.) – Tamiya & others

Tuning Haus front arm sets deliver a more durable, adjustable, and economical high performance option for Tamiya and other F1 chassis. Steering blocks are machined, tapped, and etched with a timed Tuning Haus logo to make L/R orientation simple, while the lower profile design provides additional options for ride height adjustment. Steel axles are keyed into the steering block for accurate fit with the kingpin, and are drilled and tapped 3mm for securing axle/arm assembly to the kingpin (if desired). All components in addition to optional 2.4mm offset axles are available separately.


TUH1160
Aluminum Steering Arm Set w/inline axles- Black

TUH1161
Aluminum Steering Arm Set w/inline axles- Sky Blue
Drivers who utilize trailing caster as part of their setup strategy will appreciate these axles for use with Tuning Haus aluminum steering blocks.


TUH1162
Front axles - 2.4 offset (pr.)
These are direct replacements for the axles included with TUH160 and TUH1161


TUH1163
Front axles - inline (pr.)