Replace the stock capacitor bank included with most ESC’s with the Big Punch from Tuning Haus to obtain the most acceleration possible in controlled motor and ESC classes. Packing a capacitance of 3280uF and equipped with flexible silicone wire for easy installation.


TUH1002
Big Punch ESC Power Capacitor
Safely store, transport, and charge one or two 1S or 2S shorty LiPo packs using this convenient bag, featuring heavy-duty construction and solid hook and loop fasteners for added safety and security.


TUH1003
1S Lipo Safety Storage Bag
Safely store, transport, and charge one or two 2S standard or “shorty” LiPo packs using this convenient bag, featuring heavy-duty construction and solid hook and loop fasteners for added safety and security.


TUH1004
2S Lipo Safety Storage Bag
A lightweight, flat set-up board is the perfect pit work surface. Tuning Haus offers the ideal size for 1/10 touring, F1, or smaller race cars. Constructed from easy-to-clean laminates, the light grey color provides an excellent working background and a flat surface to ensure precise vehicle setup.


TUH1020
Set Up Board 1/10 (424x294)
A lightweight, flat set-up board is the perfect pit work surface. Tuning Haus offers the ideal size for 1/8 on-road, 1/8 off road buggy and similar race cars where a larger area if preferred. Constructed from easy-to-clean laminates, the light grey color provides an excellent working background and a flat surface to ensure precise vehicle setup.


TUH1021
Set Up Board 1/8 (580x460)
Tuning Haus has developed a more aggressive cleaner and conditioner for rubber and foam tires. Easily removes build up and track debris, leaving tires in perfect condition for their next run. Can also be used to clean scuff marks and marker mistakes from bodies, and features a convenient flip-up applicator top.


TUH1022
Foam & Rubber Tire Cleaner/Conditioner (4 oz.)
Tuning Haus offers a conveniently-sized container of premium black grease, ideal for thrust bearings, transmission gears, and many other areas where a quality lubricant is required to do speeds, load, or wear.


TUH1023
Black Grease 8cc
When assembling or rebuilding shocks, it’s always a good idea to lube the shock shaft prior to assembly. Tuning Haus grease helps to protect the shock cartridge O-rings from tearing against the threads on the shock shaft. Offered in a conveniently-sized tube that fits easily into any toolbox.


TUH1024
Shock O-ring Grease 8cc
Premium silicone fluids for damper tubes and many other uses are available in convenient applicator tubes from Tuning Haus. Offered in 50K, 75K, and 100K viscosities.


TUH1025
50,000 wt silicone fluid 8cc
TUH1026
75,000 wt silicone fluid 8cc
TUH1027
100,000 wt silicone fluid 8cc
Stay tuned with Tuning Haus stickers sized specifically for F1 bodies and wings.


TUH1097
Tuning Haus Die-Cut Logo Sheet
Keep your valuable wrenches and other tools safe, secure, and organized with this convenient carrying case from Tuning Haus. A robust shell is encased with durable, machine-stitched fabric and completed with a sturdy zipper.


TUH1098
Universal Tool & Wrench Bag
Protect your work surface with this durable pit pad from Tuning Haus. Conveniently sized at just over 28” wide, it easily fits under a set up board or car stand. Machine washable and not affected by most R/C cleaners and solvents.


TUH1099
Racing Pit Pad (720 x 440mm)
Setup wheels are an important tool used to achieve accurate and repeatable chassis settings. Variances in wheel, insert, and tire diameters can make it difficult to perform critical adjustments such as camber and toe-in “just right”. Tuning Haus setup wheels simplify the process by threading directly onto the axle; eliminating the need for a separate wheel nut. Perfect for use with 1/10 touring cars, Formula 1 chassis, drift cars, and others using 4mm threaded axles. Manufactured from billet aluminum and anodized black, they feature durable rubber O-rings and come packed in a convenient storage case.


TUH1102
Precision Thread-On Setup Wheels (4)
Tuning Haus differential balls are produced from chrome steel hardened to RC60 and are spherical within a tolerance of .0001” (.0025mm). Perfect for most any on-road or off-road differential and conveniently available in 1/8”, 3/32”, and 3mm sizes. Each package contains sixteen pieces.


TUH1106
Ultra-Precision Diff Balls (16) 1/8"
Tuning Haus differential balls are produced from chrome steel hardened to RC60 and are spherical within a tolerance of .0001” (.0025mm). Perfect for most any on-road or off-road differential and conveniently available in 1/8”, 3/32”, and 3mm sizes. Each package contains sixteen pieces.


TUH1107
Ultra-Precision Diff Balls (16) 3/32"
Tuning Haus differential balls are produced from chrome steel hardened to RC60 and are spherical within a tolerance of .0001” (.0025mm). Perfect for most any on-road or off-road differential and conveniently available in 1/8”, 3/32”, and 3mm sizes. Each package contains sixteen pieces.


TUH1108
Ultra-Precision Diff Balls (16) 3mm
Tuning Haus provides an ideal solution for attaching scale details or other mounting tasks where a minimum gap and high strength is desired. The thickness of 0.16mm (.006”) allows for a “glued on” look without the mess, while the convenient 25mm (1’’) width minimizes waste. The 1M (39”) roll is enough for multiple complex projects.


TUH1121
Super-Thin Tuning Tape
When a servo, ESC, transponder or receiver must absolutely stay securely in place, look no further. This genuine 3M™ material is produced for Tuning Haus in convenient 25mm (1”) by 1M (39”) rolls. Only 0.86mm (.035”) thick yet delivers superior holding power.


TUH1122
Ultra-Strong Tuning Tape
Transport and organize your race equipment with this new bag from Tuning Haus. Made from strong, wear-resistant nylon with heavy duty closures and hardware. Black in color with blue piping and Tuning Haus logos embroidered on the side and both ends. The front zippered pocket has ample capacity for parts boxes or a small charger, while the end pockets easily accept larger items, spray cans, or boxes. The center compartment offers ample room for chassis, transmitters and support equipment whereas smaller or loose items can be securely stored in three separate clear pockets. A robust center handle makes the bag balanced and easy to carry, or use the included shoulder strap for hands-free transport. Overall dimensions are 610mm x 330mm x 330mm (24” x 13” x 13”).


TUH1155
Tuning Haus Equipment Bag
Tuning Haus delivers a robust wiring solution for owners of the popular iCharger series, as well as many other chargers. The main leads are 460mm (18”) long and constructed from premium 10AWG silicone wire. The double-sided bullet plugs allow convenient charging of packs with either 4mm or 5mm receptacles. The unused plug sides are covered with included rubber caps to safeguard against accidents. Balancing leads are configured for precision balance charging of any 1S or 2S battery pack, and the harness is finished with a mesh wire wrap to keep pit space work areas organized


TUH1170
Pro Charge Lead Set
The popularity of 5mm battery plugs can sometimes cause a challenge when using different battery packs with differing plug sizes during the same track day. Tuning Haus provides a safe solution to your charging needs with premium dual-sized bullet connectors containing a center port for easy assembly and soldering. In addition, rubber safety caps are supplied to protect the unused sides from potential safety hazards. Package contains 2 each 4/5mm bullet connector, 4mm rubber cap and 5mm rubber cap.


TUH1175
4/5mm Bullet Connectors with Safety Caps
This universal temperature probe can be used for a variety of applications. Racers can monitor battery pack temperatures during charging/discharging and set safety cutoff parameters. Pilots can use the device for a multitude of safety or in-flight telemetry purposes. When used with the iCharger series, please note the correct port location and polarity as shown in the photograph.


TUH1225
Temperature Sensor w/Strap - fits iCharger and others
No more sanding or polishing diff rings! Tuning Haus is pleased to offer TKO’s flat and finished diff rings, which utilize a proprietary process to deliver the finest possible product. Faces are flat to within 2 microns and parallel to within 1 micron. (One micron is .0000040”/0.001mm) After processing the rings are inspected with an optical flat and monochromatic light to insure quality and consistency. Build the ultimate differential for your 1/12 or 1/10 pan car. Also fits CRC, VBC, and other (non-Tamiya) F1 cars.


TUH1250
Precision On-Road Diff Rings by TKO (pr.)